MPSH type guillotine shears are designed for cutting sheets of metallic or non-metallic materials. Rigid welded construction together with electric motor and crank mechanism ensure high capacity, speed and quality of cutting. Motorized shears of the MPSH type are reinforced version of the MPS shears, thus allowing it to cut thicker materials, and therefore they are equipped with a system for gap adjustment of the clearance between the blades, thus ensuring a high quality of shearing for different thicknesses of material.
System of two rotating caps located on the left and the right side is equipped with a gauge for the correct setting of the gap.
Machines are normally equipped with the manual back gauge with metering of position, blades consisting of two shearing edges, counter for numbering of cuts, and by rubbery retainer of sheet metal that prevents damage to the material during cutting process.
Control of shears is provided by movable foot pedal with immediate stop function.
MPSH - manual back gauge 0-750mm
MPSH EB - motorized back gauge 0-750mm, with manual fine adjustment to the position
MPSH EC - motorized back gauge 0-750mm, NC control system
Producer reserves the right to change all specifications subject without notice.
H.M. Transtech, s.r.o.
Volgogradská 13/B
080 01 Prešov, Slovakia
Tel.: +421 51 771 85 16
Mobil: +421 907 934 453
E-mail: sales@hmtranstech.com
Copyright © 2014-2024 H.M. Transtech, s.r.o. All rights reserved.